Deeply Embedded ARM Applications


OMI/DE-ARM - 6909

Keywords embedded control systems, RISC microprocessors, ARM


Start Date: 01-APR-92 / Duration: 36 months

[ contact / participants ]


Objectives

The objective of OMI/DE is to create and demonstrate a European capability in the design and manufacture of 32-bit RISC microprocessors for deeply embedded control, that is, systems where the processor is employed as a macrocell within a highly integrated chip that also contains significant application-specific components. The project further aims to create a European capability that will allow customers to develop their own deeply embedded systems, without reference to the technology suppliers, by providing a range of tools (from high-level simulation to VLSI macrocells for use with standard ASIC composition tools), and to provide the necessary support for system testing and debugging. The project takes as its baseline the ARM microprocessor architecture, designed in Europe, and a world-leader in low power RISC.

Detailed goals are to develop:

Existing and emerging standards (such as VHDL) will be employed, and existing silicon development tools used.

OMI/DE is organised around a number of applications feasibility studies which will assess the requirements for deeply embedded applications. The studies will feed into an investigation of the architectural extensions required to meet these applications and provide practical recommendations to the other OMI projects. The recommendations will guide implementations of both CPUs and application-specific macrocells within the framework of the other OMI Eurocell library and interface project, SMILE (6142). These macrocells will be used to construct applications demonstrators leading towards commercial exploitation. The applications have been chosen from the telecommunications and home entertainment industries: the final IRIS demonstrator will be a musical instrument based on a single silicon chip containing an embedded ARM microprocessor and a dedicated digital signal processor.

Further information about DE-ARM is available from the DE-ARM home page.


CONTACT POINT

Mr Matt Lee
Advanced RISC Machines Ltd
Park End
Swaffham Bulbeck
UK - Cambridge CB5 0NA
tel: + 44 / 223-812800
fax: + 44 / 223-812800

Participants

ADVANCED RISC MACHINES LTD - UK - C
ELETTRONICA - I - P
HAGENUK - D - P
IRIS - I - P
PLESSEY UK LTD - UK - P
UMIST - UK - A
VLSI TECHNOLOGY CENTRE - F - A
UNIVERSITÄT HANNOVER - D - A
UNIVERSITY OF MANCHESTER - UK - A


TBP synopses home page TBP acronym index TBP number index
OMI synopses home page OMI acronym index OMI number index
All synopses home page all acronyms index all numbers index

OMI/DE-ARM - 6909, December 1993


please address enquiries to the ESPRIT Information Desk

html version of synopsis by Nick Cook